Can all the data in a crashed hard drive be recovered or will any recovery attempt just cause additional harm to the drive?
Indeed, all the data on a crashed hard disk can be recovered; but, this is only guaranteed if suitable recovery methods are followed. On the other hand, if you try data recovery using wrong techniques, you will find yourself worsening the damage done previously.
We recognize that losing important data especially can make a hard disk crash stressful. We have so prepared this guide to assist you with reliable hard disk crash recovery approaches.
Find Out Where Something Went Wrong
Knowing the various causes will help one avoid repetition in the future before talking on how to recover data from damaged external hard drives.
Possible Reasons for Damage | Solutions |
Physical Damage (e.g., drops, impact) | Use protective cases and handle drives carefully. Avoid sudden movements. |
File System Corruption | Regularly back up data. Use disk checking tools like CHKDSK to prevent errors. |
Power Surges or Outages | Use a surge protector or Uninterruptible Power Supply (UPS). |
Firmware Issues | Regularly update firmware and consult professional recovery services if needed. |
Overheating | Ensure proper ventilation and avoid using drives in extreme temperatures. |
Bad Sectors | Run disk utilities to check for bad sectors. Replace the drive if it worsens. |
Water or Moisture Exposure | Keep drives in dry areas. If exposed to water, consult a data recovery expert. |
Malware or Virus Attack | Use reputable antivirus software and regularly scan your system. |
Improper Ejection | Always eject drives properly before disconnecting to avoid file corruption. |
Aging or Wear and Tear | Replace old hard drives proactively and regularly back up critical data. |
Recover Data from Crash Hard drive
Try the following hard drive crash recovery techniques to recover your data knowing the most likely reasons for your hard drive mistake:
Recover lost data drive file using HD Recovery Tool.
Despite the extent of damage done, you can retrieve data from a crashed hard disk. You only require an efficient HDD drive data recovery tool. And BLR Data Recovery Tool is one quite effective and powerful tool you can use.
BLR Tools has proven over years to be reliable whenever data recovery from a hard disk device is needed. Its simple interface makes use quite accessible for users of all degrees, including novices and computer-savvy ones.
Designed to deal with several hard drive failure circumstances including formatted drives, harmed file systems, mechanical damage, unintentional file deletion, lost partition, faulty industries, virus or malware attacks, etc., it can also handle
Moreover, a lot of brands—including Microsoft, as well as Intel, Lenovo, Dell, HP, Samsung, Seagate, etc.—are compatible with this HDD data recovery tool. It also supports many file formats, including NTFS, APFS, and HFS+, either directly or directly. You should be assured that every one of your data types will be restored.
Using BLR data recovery tool, these are the processes for recovering data from damaged hard drive:
1. Get and set the BLR Data Recovery Software for Windows on your PC.
2. Connect the hard disk drive to your PC.
3. Launching BLR Data Recovery Tool, select the hard drive.
4. The advanced artificial intelligence software will begin scanning the disk for all the data automatically.
5. Review the displayed results, select the data you wish to retrieve, then click Recover. Just select all the data on the device and click Recover if you wish to access every bit of it.
Recovering data from a failed hard drive with Disk Management Utility
The Disk Management Utility is another hdd data recovery program. Sometimes when a hard drive is faulty, it shows error messages like “Disk Structure is Corrupted and Unreadable” or “Disk Unknown Not Initialized.” This indicates either a wrong setup or damage of the hard disk device.
In general, the Disk Management Utility generates, deletes, formats partitions as well as investigates the state of the hard disk. It also helps to solve issues involving poor sectors in the hard disk configuration.
Data can be recovered from a failed hard disk as follows:
1. Press Windows and X together on your keyboard; afterwards, select Disk Management.
2. Search for and format the crashed hard disk drive to correct the mistakes.
3. Arrangement of the drive will allow access once more.
Corrupted Hard Drive Recovery using CHKDSK
CHKDSK (Check Disk) is another reliable method for recovering data from corrupted hard drives. Intended to examine the reliability of the hard disk drive, repair logical file system faults, and attempt to retrieve data from faulty sectors, this in-built Windows operates.
These represent the CHKDSK hard disk crash recovery process:
1. Type Command Prompt and selected Run as administrator in your Windows search bar.
2. Finding faulty sectors and finding recoverable data from them is much easier with CHKDSK. It can also fix system overheating caused mistakes.
3. Enter on your keyboard type chkdsk and hit Enter. This method will examine your crashed hard drive’s faults.
4. Fix the hard disk using type chkdsk F: /r /x. Here the drive letter on the hard disk is written with F. Change it with your hard disk drive letter.
In conclusion,
First of all, stop using the hard drive if you are seeking ways for recovering data from a damaged hard drive caused by logical or physical causes. Continuous use of the hard disk might cause the data in it to be overwritten, consequently demand for rewrite file recovery.
For particularly challenging situations, say if you wish to retrieve data from a damaged HDD, you could speak with a professional hard drive data recovery service.
Also Read :- 7 Cloud Migration Mistakes to Avoid at All Costs